This is a ‘tester kit’ (only in black) - a piece of guttering to size up fitment to a building and handy to take to a DIY store to buy the guttering and any fittings required.

Acquiring the guttering locally represents a substantially more cost effective route given the £30-40 courier charges that are now commonplace for deliveries of longer lengths over 1.2m.

Our brackets (which open/can clamp up to 3" deep) are sold individually or in multi-packs, available also in Brown, Grey and White.

Price for this tester kit includes postage within the UK, non-returnable due to the nature of the product.

The Original Hall's Rainsaver Gutter Kit - but with a bendy downpipe!

The simple solution to the problem of fixing guttering to sheds.

The kit assembles without tools, and can be fit in seconds (click for short one minute video). Choose your required length below.

Each kit contains guttering, pipe, brackets etc for one side.

Simply slide brackets on to gutter, add stop end and clamp the whole thing to the roof. Slide the flexible downpipe on, nip up the clamp and start saving rainwater into the water butt of your choosing!

Longer kits contain additional guttering lengths, brackets and unions (connectors). See specifications in additional description tab below.

Bracket opening clamps between 10mm (approx 1/3") and 76mm (approx 3") - roof edges <10mm thick will need a bit of packing material e.g. small block of wood

Hard surfaces on some plastic and metal sheds may benefit from anti-slip material to help the brackets grip.

Please note: These are long items (kits are packaged into 1.9m boxes) and therefore need to be sent via courier.

*** STOCKS OF KITS LIMITED -  WHILE STOCKS LAST ***

BRACKET AVAILABILITY UNAFFECTED

Simply rolls up and wedges snugly into the stop-end outlet!

Black plastic mesh measures approximately 255mm wide x 80mm (10" x 3.25") high when flat.

For use with Halls Rainsaver Gutter kit or standard 75/76mm (3") mini guttering to extend and/or offer additional support.

Recommend one bracket for every 3-4ft (1-1.2m) of guttering.

Package contains:

Hall's Rainsaver Bracket, for 75/76mm guttering (in Black, Brown, Grey or White - NB colour matching existing guttering is only a close approximation due to manufacturer differences)

Specifications:

Bracket opening clamps between 8mm (approx 1/3") and 76mm (approx 3")

Hard surfaces on some plastic and metal sheds may benefit from anti-slip material to help the brackets grip.

PLEASE NOTE: Free Delivery on this item within the UK

** GREY BRACKETS NOW BACK IN STOCK AS OF 10 APRIL **

Strip measures approximately 300mm x 25mm x 2mm thick (12" x 1")

One 12" length can be cut to size to fit 6-12 brackets - it can be doubled up for "extra squish"

NB all contact surfaces (roof and brackets) are REQUIRED to be squeakily CLEAN and DRY prior use to be effective (any dust/dirt/grime or excessive handling of the grip strip will significantly reduce the available friction and is not a fault of the product)

Available in various lengths from 1-3 metres (approx 3'3" to 9'9") in 0.5m (approx 1'7") increments.

Made from lightweight black highly flexible PVC hose that can be bent round tight corners. See below for specifications. Length shown in photos: 1 metre.

Comes complete with hand-tighten double wire hose clamp for securing to the Stop-end outlet of a Hall's Rainsaver Gutter Kit.

WILL NOT FIT 68mm HOUSEHOLD DOWNPIPE - for a larger diameter pipe, please see our Wider 70mm version

This ONLY fits 56mm outside diameter pipes. For narrower (46mm inside 50mm outside diameter) pipes we have a 51mm version (clamps sold separately)

By far the easiest and smartest way to have a water butt "around the corner".

50mm supporting clips are available to be used for longer runs if necessary.

NB all flexible pipe is measured and cut 10cm or so oversize under a slight stretch - due to compression in packaging, the measurement at rest (particularly when laid flat) may appear less, this will resolve by hanging vertically and can also be helped by warming up the pipe and a stretch (PVC will soften slightly and harden slightly when warmed and cooled).

Made from lightweight black highly flexible PVC hose that can be bent round tight corners. See below for specifications.

A suitable method of fixing (large jubilee clip etc) may be required. See the Jubilee Clip here and Screw-to-wall pipe brackets can be used for support if required.

NB all flexible pipe is measured and cut 10cm or so oversize under a slight stretch - due to compression in packaging, the measurement at rest (particularly when laid flat) may appear less, this will resolve by hanging vertically and can also be helped by warming up the pipe and a stretch (PVC will soften slightly and harden slightly when warmed and cooled).

Please select required length below.  NB price for "10m coil" includes carriage within Mainland UK

Made from lightweight black highly flexible PVC with an integral steel helix, this hose can be bent round tight corners. See below for specifications.

A suitable method of fixing, such as this size 2 stainless steel jubilee clip may be required.

50mm supporting clips are available to be used for longer runs if necessary.

Please note that our 60mm double wire clamp will NOT work as it will not clamp tight enough.

NB all flexible pipe is measured and cut 10cm or so oversize under a slight stretch - due to compression in packaging, the measurement at rest (particularly when laid flat) may appear less, this will resolve by hanging vertically and can also be helped by warming up the pipe and a stretch (PVC will soften slightly and harden slightly when warmed and cooled).

Price for "10m coil" includes carriage within Mainland UK

Size 2 SS (40-55mm)

Stainless Steel - High Corrosion Resistance - Genuine Jubilee made in UK

51mm pipe not included

Size 3X SS (60-80mm)

Stainless Steel - High Corrosion Resistance - Genuine Jubilee made in UK

Pipe not included

As sold with our 57mm flexible pipe (sold separately)

56-61mm clamping capacity, zinc passivated steel.

Please note: NOT suitable for our 51mm flexible pipe. (will not tighten below 56mm)

Also fits perfectly over our 51mm and 57mm flexible downpipes!

For smaller pipes (51 and 57mm), please use the 50mm retaining clip)

Extends a Hall's Rainsaver Gutter System by approx 2ft.

Extension Kit comprises, in black colour:

1 x 0.59m x 75mm Gutter
1 x 75mm Gutter Union, pre-attached
1 x Hall's Rainsaver Bracket

Extends a Hall's Rainsaver Gutter System by approx 4ft.

Extension Kit comprises, in black colour:

1 x 1.18m x 75mm Gutter
1 x 75mm Gutter Union, pre-attached
1 x Hall's Rainsaver Bracket

Please note due to the length of this product and Royal Mail's new pricing scheme from April 2013 this item is subject to courier delivery with an increased delivery charge.

Extends a Hall's Rainsaver Gutter System by approx 6ft.

Extension Kit comprises, in black colour:

1 x 1.78m x 75mm Gutter
1 x 75mm Gutter Union, pre-attached
1 x Hall's Rainsaver Bracket

Please note: This is a long item subject to additional delivery cost imposed by our couriers.

Outlet outside diameter approx 54mm, widest part at top approx 56mm

This is not specially engineered with a flange so downpipe brackets/screws will be required if rigid downpipe is used, alternatively our flexible downpipe with clamp will securely fit to the outlet without tools.

Outlet outside diameter approx 54mm, widest part at top approx 56mm

Please note: This is a long item subject to additional delivery cost imposed by our couriers.

inside diameter 52mm outside diameter 56mm

Please note that this item will be available whilst stocks last.

Please note due to the length of this product and Royal Mail's new pricing scheme from April 2013 this item is subject to an increased delivery charge as it has to go via courier.

Inside diameter of female side approx 56mm

Outside diameter of male side approx 54mm

Please note that this item will be available whilst stocks last. Our new Flexible Downpipe may be a suitable alternative that doesn't require any friction fit modifications.

We have discontinued the rigid pipe kits in favour of the flexible pipe kits, which are a more satisfactory means to save water into a water butt (more secure, allows more freedom in placement of water butt and pipe doesn't constrain the guttering as much). If a more bespoke rigid downpipe setup is required, our brackets on their own can be purchased (in 4 different colours) and will fit the standard 'mini half round' 76mm guttering and pipework that can be obtained locally from most DIY shops.

For the flexible downpipe version, click here.

The simple solution to the problem of fitting guttering to sheds.

The kit assembles without tools, and can be fit in seconds (click for short one minute video). Choose your required length below.

Each kit contains guttering, pipe, brackets etc for one side.

Simply slide brackets on to gutter, add stop end and clamp the whole thing to the roof. Slide the downpipe on, insert into water butt (not included) and start saving rainwater!

Longer kits contain additional guttering lengths, brackets and unions (connectors). See specifications in additional description tab below.

Bracket opens to clamp between 10mm (approx 1/3") and 76mm (approx 3") - roof edges <10mm thick will need a bit of packing material e.g. small block of wood.

Hard surfaces on some plastic and metal sheds may benefit from anti-slip material to help the brackets grip.

Please note: These are long items (kits are packaged into 1.9m boxes) and therefore need to be sent via courier.

** SUPERSEDED BY THE FLEXIBLE PIPE KIT, ON SALE HERE **