The Hall’s Rainsaver Movable Gutter Kit contains everything needed to save water, but the butt!
We have discontinued the rigid pipe kits in favour of the flexible pipe kits, which are a more satisfactory means to save water into a water butt (more secure, allows more freedom in placement of water butt and pipe doesn’t constrain the guttering as much). If a more bespoke rigid downpipe setup is required, our brackets on their own can be purchased (in 4 different colours) and will fit the standard ‘mini half round’ 76mm guttering and pipework that can be obtained locally from most DIY shops.
For the flexible downpipe version, click here.
The simple solution to the problem of fitting guttering to sheds.
The kit assembles without tools, and can be fit in seconds (click for short one minute video). Choose your required length below.
Each kit contains guttering, pipe, brackets etc for one side.
Simply slide brackets on to gutter, add stop end and clamp the whole thing to the roof. Slide the downpipe on, insert into water butt (not included) and start saving rainwater!
Longer kits contain additional guttering lengths, brackets and unions (connectors). See specifications in additional description tab below.
Bracket opens to clamp between 10mm (approx 1/3″) and 76mm (approx 3″) – roof edges <10mm thick will need a bit of packing material e.g. small block of wood.
Hard surfaces on some plastic and metal sheds may benefit from anti-slip material to help the brackets grip.
Please note: These are long items (kits are packaged into 1.9m boxes) and therefore need to be sent via courier.
The Original Hall’s Rainsaver Gutter Kit – but with a bendy downpipe!
The simple solution to the problem of fixing guttering to sheds.
The kit assembles without tools, and can be fit in seconds (click for short one minute video). Choose your required length below.
Each kit contains guttering, pipe, brackets etc for one side.
Simply slide brackets on to gutter, add stop end and clamp the whole thing to the roof. Slide the flexible downpipe on, nip up the clamp and start saving rainwater into the water butt of your choosing!
Longer kits contain additional guttering lengths, brackets and unions (connectors). See specifications in additional description tab below.
Bracket opening clamps between 10mm (approx 1/3″) and 76mm (approx 3″) – roof edges <10mm thick will need a bit of packing material e.g. small block of wood
Hard surfaces on some plastic and metal sheds may benefit from anti-slip material to help the brackets grip.
Please note: These are long items (kits are packaged into 1.9m boxes) and therefore need to be sent via courier.
A simple fit addition that can help stop leaves and other similar debris floating into the downpipe and into water containers.
Simply rolls up and wedges snugly into the stop-end outlet!
Black plastic mesh measures approximately 255mm wide x 80mm (10″ x 3.25″) high when flat.
The Hall’s Rainsaver Bracket, specially designed to clamp by hand without tools to standard shed and similar roofs, supporting lengths of 75/76mm guttering and offers axial rotation (to level the gutter on different pitch roofs).
For use with Halls Rainsaver Gutter kit or standard 75/76mm (3″) guttering to extend and/or offer additional support.
Recommend one bracket for every 3-4ft (1-1.2m) of guttering.
Package contains:
Hall’s Rainsaver Bracket, for 75/76mm guttering (in Black, Brown, Grey or White – NB colour matching existing guttering is only a close approximation due to manufacturer differences)
Specifications:
Bracket opening clamps between 8mm (approx 1/3″) and 76mm (approx 3″)
Hard surfaces on some plastic and metal sheds may benefit from anti-slip material to help the brackets grip.
PLEASE NOTE: Free Delivery on this item within the UK
Grip Strip helps brackets to grip “slippy” hard roof surfaces like plastic or metal – simply place between bracket and surface used to increase the friction.
Strip measures approximately 300mm x 25mm x 2mm thick (12″ x 1″)
One 12″ length can be cut to size to fit 6-12 brackets – it can be doubled up for “extra squish”
NB all contact surfaces (roof and brackets) are REQUIRED to be squeakily CLEAN and DRY prior use to be effective (any dust/dirt/grime or excessive handling of the grip strip will significantly reduce the available friction and is not a fault of the product)
The latest innovation from Hall’s Rainsaver – allows a water butt to be positioned almost anywhere with our gutter kits (not suitable for larger or smaller downpipes, see below).
Available in various lengths from 1-3 metres (approx 3’3″ to 9’9″) in 0.5m (approx 1’7″) increments.
Made from lightweight black highly flexible PVC hose that can be bent round tight corners. See below for specifications. Length shown in photos: 1 metre.
Comes complete with hand-tighten double wire hose clamp for securing to the Stop-end outlet of a Hall’s Rainsaver Gutter Kit.
WILL NOT FIT 68mm HOUSEHOLD DOWNPIPE – for a larger diameter pipe, please see our Wider 70mm version
This ONLY fits 56mm outside diameter pipes. For narrower (46mm inside 50mm outside diameter) pipes we have a 51mm version (clamps sold separately)
By far the easiest and smartest way to have a water butt “around the corner”.
50mm supporting clips are available to be used for longer runs if necessary.
NB all flexible pipe is measured and cut 10cm or so oversize under a slight stretch – due to compression in packaging, the measurement at rest (particularly when laid flat) may appear less, this will resolve by hanging vertically and can also be helped by warming up the pipe and a stretch (PVC will soften slightly and harden slightly when warmed and cooled).
This wider pipe (70mm inside diameter) is more suited for household rainwater guttering fitting comfortably over 68mm pipes. NB This pipe is too large to fit the Hall’s Rainsaver Gutter Kit outlet – please look at the Flexible Downpipe with Clamp for that version.
Made from lightweight black highly flexible PVC hose that can be bent round tight corners. See below for specifications.
A suitable method of fixing (large jubilee clip etc) may be required. See the Jubilee Clip here and Screw-to-wall pipe brackets can be used for support if required.
NB all flexible pipe is measured and cut 10cm or so oversize under a slight stretch – due to compression in packaging, the measurement at rest (particularly when laid flat) may appear less, this will resolve by hanging vertically and can also be helped by warming up the pipe and a stretch (PVC will soften slightly and harden slightly when warmed and cooled).
Please select required length below. NB price for “10m coil” includes carriage within Mainland UK
High quality Stainless Steel Jubilee clip suitable for our 51mm flexible downpipe (does not fit the 57mm or 70mm flexible pipe)
Size 2 SS (40-55mm)
Stainless Steel – High Corrosion Resistance – Genuine Jubilee made in UK
51mm pipe not included
High quality Stainless Steel Jubilee clip suitable for the larger flexible 70mm downpipe
Size 3X SS (60-80mm)
Stainless Steel – High Corrosion Resistance – Genuine Jubilee made in UK
Pipe not included
Saddle type bracket (requires 2 x screw fixing) suitable for supporting 70mm pipe including our larger flexible downpipe
For smaller pipes (51 and 57mm), please use the 50mm retaining clip)
2′ Extension set for Hall’s Rainsaver Gutter Kit
Extends a Hall’s Rainsaver Gutter System by approx 2ft.
Extension Kit comprises, in black colour:
1 x 0.59m x 75mm Gutter
1 x 75mm Gutter Union, pre-attached
1 x Hall’s Rainsaver Bracket
4′ Extension set for Hall’s Rainsaver Gutter Kit
Extends a Hall’s Rainsaver Gutter System by approx 4ft.
Extension Kit comprises, in black colour:
1 x 1.18m x 75mm Gutter
1 x 75mm Gutter Union, pre-attached
1 x Hall’s Rainsaver Bracket
Please note due to the length of this product and Royal Mail’s new pricing scheme from April 2013 this item is subject to courier delivery with an increased delivery charge.
6′ Extension set for Hall’s Rainsaver Gutter Kit
Extends a Hall’s Rainsaver Gutter System by approx 6ft.
Extension Kit comprises, in black colour:
1 x 1.78m x 75mm Gutter
1 x 75mm Gutter Union, pre-attached
1 x Hall’s Rainsaver Bracket
Please note: This is a long item subject to additional delivery cost imposed by our couriers.
Updating…